Drive 13081 Low Height Overbed Table

A standard overbed table sits too high on a floor-low bed. The Drive 13081 Low Height Overbed Table is built for low beds with 3.25-inch frame-to-floor clearance. The walnut melamine top moves between 19.5 and 27.5-inch. It is not the 28-45-inch 13003, and it is not a tilt-top.

Why Choose This Product?

A table that matches a low deck

Drive designed 13081 for low beds. The base needs 3.25-inch of frame-to-floor room. Standard 13003 starts at 28-inch and will sit above a floor-low mattress.

A shorter height band

The top locks anywhere from 19.5 to 27.5-inch. That is the range when the sleep surface is closer to the floor.

A chrome mast on swivel casters

Tubular steel with a chrome finish rolls on swivel casters. Slide the wide base under the low frame.

A flat walnut top

The 15 by 30-inch melamine top stays level. It is not the tilting 13008.

Who Is It Best For?

This 13081 is for a low homecare bed with about 3.25-inch under the frame, when a standard 28-inch table would sit too high. It is a weaker fit on a typical 15-20-inch homecare deck that needs 13003 or 13008.

• A low bed with 3.25-inch frame-to-floor clearance
• A 19.5-27.5-inch table, not a 28-45-inch table
• Showroom stock on this listing

Low-Height Table vs Standard Non-Tilt vs Tilt-Top

Bed height is the decision. 13081 is the low-style table. 13003 and 13067 start at 28-inch. 13008 tilts and starts at 29.5-inch. Do not put 13081 on a standard high deck if you need the taller range.

• Drive 13003 Chrome Non-Tilt: standard 28-45-inch non-tilt table.
• Drive 13008 Deluxe Tilt-Top: 29.5-46-inch tilt-top, not a low-bed table.
• Drive Delta Ultra-Light: confirm frame-to-floor clearance before you pair it with 13081.

Product Specifications

Things to Consider Before Buying

• Measure under the bed. Drive calls for 3.25-inch of frame-to-floor clearance. A thicker side-rail or a boxed frame may block the base.
• The height band is short. If the mattress sits near 28-inch, a standard 13003 or 13008 is the better match.
• This is a tabletop rating, not a standing aid. Do not lean on the top to get up.
• Confirm current availability before you visit. Showroom stock is on this listing.

Why Buy from Affinity Home Medical?

Affinity Home Medical is a local home-medical supplier in South Salt Lake. If you are matching a rolling overbed table, a tilt-top, or a bed-mounted swivel tray to the bed you already have, we can compare fit before you order.

Store pickup, local delivery, and nationwide shipping are available. Contact our team to confirm current availability.

Call 801-906-3900 or visit 3737 S State St, South Salt Lake, UT 84115.

Frequently Asked Questions

Will this fit a standard hospital bed?

Only if the frame sits low enough. 13081 is for low beds with 3.25-inch clearance. Use 13003 or 13008 on a typical 15-20-inch homecare deck.

Does the top tilt?

No. 13081 stays flat. Drive 13008 is the deluxe tilt-top.

Is this the same as 13003?

No. 13003 is the standard-height chrome non-tilt. 13081 is the low-style table with a 19.5-27.5-inch range.

Can I see this in the showroom?

Yes. This model is available to see at the Salt Lake City showroom. Call first if you want us to pull it before you visit.

How do I order or get help choosing?

Call Affinity Home Medical at 801-906-3900, or visit 3737 S State St, South Salt Lake, UT 84115. We can compare tilt vs flat tops, H-base vs U-base, and bed-mounted trays before you order.

Ready to Order?

Shop this 13081 listing on this page when this model is the match. For help comparing overbed tables, call 801-906-3900 or visit 3737 S State St, South Salt Lake, UT 84115.

Specifications